Easy to maintain, tiles still require regular maintenance to avoid getting crashed. Here are the solutions for floor tiles, wall, in the bathroom or the kitchen, without trace and always shiny.
Tiles, especially in very frequented rooms, requires regular maintenance to prevent dirt to be encrusted there and that it is tarnished prematurely.
Which product to use for regular tiling cleaning?
For routine cleaning, the best is to use thelukewarm water with a washing productideally not very aggressive for joints, such as St-Marc detergent.
But if you have no suitable product at hand, you can use thepotato cooking water. A cheap grandmother’s recipe, and has proven itself!
These basic solutions, on the other hand, will not be enough to overcome soils held for too long away from the mop.
- Very dirty tiles can be cleaned by mixing two tablespoons of baking soda in hot water. If the tiles are really dirty, you can also add two tablespoons of white vinegar.
- If you are faced with a Points or sticky tilesarm yourself with a big sponge soaked in white vinegarmore or less diluted depending on the extent of the damage.
- If your soil is really fattyswole your mop against a hard brushcheese for example, and rub your floor with a mixture ofHot water and black soap.
- Finally, if there are still traces of recalcitrant fattyyou can spend a cloth locally soaked with benzine. Radical! The result is visible: once the fatty film has disappeared, your tiles are already brighter.
The more the years go by, the more your soil may lose its shine. If your tiling is white, start by cleaning it with a Special windowsto give it a satin aspect. For all other shades, if you are a follower of natural methods, wash it with pure milkbefore letting dry. You will see, he will already gain shine. If you have laid ceramic tiles, you can also rub them with a half-citron. Leave on for two short hours, before drying with a chamois. Guaranteed efficiency!
Last alternative for a Maximum radiance of terracotta and ceramic floors : L’linseed. After cleaning your tiles with a mixture of water, detergent and a few drops of ammonia, dry it carefully with a dry cloth and apply a first layer of oil with a brush. Repeat the operation a second time after drying. You will see, it will be a real youth bath for your floor!
