Simple and fast methods that really work

Always repel the degree of the fridge? Good news: it can go much faster than expected. With a few simple techniques, maintenance becomes easy, and frost cannot resist long.

Why should you disgust your refrigerator?

Frost is a natural reaction caused by the introduction of a Wet air in the refrigerator – It generally occurs when you open the door of the device. The foods stored there also generate humidity and contribute to the development of this ice. Frost is a problem because it creates an insulating layer on the walls of the fridge and it forces it twice as much to reach the chosen temperature (between 0 and 5 degrees depending on the seasons and needs). This leads to Electricity overconsumption and sometimes even technical damage. The layer of ice also harms the fridge when it settles on the joints surrounding the door. Therefore, foodstuffs may be less well preserved if the interior temperature is altered.

How long to plan for a defrosting?

It is not advisable to let the frost settle for too long under penalty of damaging the aircraft, but also to extend the defrosting time. In addition to the method, it is the frequency that facilitates this step: regular maintenance avoids the appearance of thick ice layers, difficult to dislodge. If you want to wait for natural cast iron once the fridge is disconnected, you have to count about 24 hours. But with a little elbow oil and a few tips, cleaning can be done in the space of an hour.

There are several techniques to remove the frost layer that appeared in your refrigerator. The first, and certainly the most obvious, is to fully empty the apparatus of the food before disconnecting it. Foods and remains of fresh dishes can be stored in coolers during defrosting in order to preserve the cold chain. Do not forget to place mops under the fridge to absorb melted ice! This process can be accelerated by simple tips:

• Place a boiling water basin inside the refrigerator, closed door, during a fifteen minutes. The slightly melted ice will be easier to remove in the towel and a cloth.
• Use a Spray specially designed to degre The fridge: Just spray it on the frost and wipe the excess with a cloth. The chemical composition of these sprays is not ideal, however, it may be wise to copy the idea of ​​vaporization, but by replacing these products with theHot water and a little white vinegar.
• Heat the walls with a hair dryer is one of the simplest techniques to say Bye Bye quickly. However, you must take care to keep a distance of a few centimeters if you want to avoid accidents.
• Sprinkle the frost of salt is a natural and quick way to melt the ice that has settled in the fridge. The residues can be removed with a scratch spatula and a cloth.

Regardless of the technique adopted, it is essential to carry out the complete cleaning of the refrigerator after having defrost it in order to eliminate any bacteria stored in the ice.

It is not always necessary to disconnect the fridge to start its defrosting. If the frost layer is fine, a soaked sponge or vaporized hot water On the walls should be enough. Some models are now equipped with a automatic defrosting mode which makes it possible to regulate the presence of ice inside the device without disconnecting it. The program starts automatically and regularly, without external intervention, which saves time on the maintenance of the fridge.

To space out the defrosting chores, it is enough to adopt some habits which limit the development of this layer of ice.

1. Of course, we avoid leaving the door of the refrigerator open for too long and we make sure that it is properly closed once the races are stored – an overloaded door of bottles can be brought to.
2. Let the dishes cool before sliding them in the fridge is also recommended, as the heat generated by leftovers creates all the more humidity.
3. Finally, it is good to place the fridge far from the devices producing heat such as microwave, radiator, oven, where it will tend to overconsom.